{"product_id":"avan-s-propeller-10cw-10ccw-choose-color","title":"AVAN-S Propeller 10CW 10CCW - CHOOSE COLOR","description":"\u003ch1\u003e \u003c\/h1\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_01.gif\" alt=\"\" width=\"850\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_02.gif\" alt=\"\" width=\"850\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_03.jpg\" alt=\"\" width=\"850\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0371\/2814\/2907\/files\/1_04.gif\" alt=\"\" width=\"850\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlades profiles are optimized at key point along the length of the blade maximize lift coefficients.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eLinear throttle response - predictable response of propeller action throughout the entire throttle band.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eHigh grade poly carbonate for propeller and stiffness.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eOptimized design to match motor performance curves of the RS2306 series of brushless motors and similar performing motors in its class.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eAdvance Ratio is used instead of conventional pitch theory to make the most efficient propeller in both speed and handling.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eExclusive locking design in propeller hub to match with RS2306 and RS2205 motors to lessen prop loosening during flight.\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003eCountless hours of R\u0026amp;D were implemented on genuine AVAN propellers to take advantage of the RS2306 (and most modern 22xx and 23xx motors) full potential.\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse of non-genuine (copied or cloned) propeller is NOT RECOMMENDED and will yield poor performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eAVAN Prop Background for detailed explanation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Avan propellers are designed from the ground up to match your equipment. Each propeller is designed to match the power curve of current motors on the market. This gives the propellers a linear throttle response, great low end control, and incredible top speed. The matched power curve allows efficient transfer of power across the throttle band.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eEach propeller was designed using custom Computational Fluid Dynamics (CFD) software. This CFD builds up the aerodynamics around a propeller using a Vortex Lattice Method including viscous and compressibility effects. This allows for an accurate performance measure in the design phase. Optimum design is chosen based off the Betz condition for a set design point. The design point is described as diameter, number of blades, speed, rpm, flight angle, and design thrust. The CFD then draws the optimum chord and blade angle distribution (Beta) along the radius to be the most efficient at that design point. This is done by modeling the shedding vortex filaments off each radial section along the blade and making them all shed off in a perfect rectangular screw (Betz Condition). Once the optimum design is set, performance is modeled across a range of speed and rpms (Advance ratio). With power and thrust known for all advance ratios, it is checked against the performance curve of the intended motor. Design conditions are then adjusted to utilize the maximum power available at each rpm from the performance curve of the set motor. This is then analyzed at different throttle positions, favoring the mid throttle range the design conditions are set.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe Avan-S propeller is a dual blade designed for top speed with high rpm set ups. This propeller is designed to match the power curve of the Emax 2306 2750kv motor. The Avan-S has a design advance ratio of .75 with a 4.2 inch pitch at 75% of radius. The Avan-S has a weight of 4 g and a moment of inertia of 25 g\/cm^2. The Avan-S uses airfoils capable of achieving higher lift coefficients at lower angles of attack to achieve more speed with less blade angle necessary. The Avan-S has a design point of 110 mph at 30000 rpm at 80 degree flight angle. This is close to a full throttle design with lighter aircraft being able to go faster. Expect to push well past 100 mph just on 4s.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eEMAX AVAN-S 5-Inch Propeller — Bulk 10CW + 10CCW\u003c\/h2\u003e\u003cp\u003eThe EMAX AVAN-S is a CFD-engineered dual-blade 5 inch propeller built for maximum top speed on high-KV setups. Designed specifically to match the power curve of the RS2306 2750KV motor, the AVAN-S pushes past 100mph on 4S LiPo while maintaining linear throttle response across the entire band. This bulk pack includes 10 CW and 10 CCW props — enough for 5 complete quad sets — in your choice of color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCFD-optimized dual-blade design\u003c\/strong\u003e — engineered for top speed and linear throttle response\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched to RS2306 2750KV\u003c\/strong\u003e — maximizes the full power potential of EMAX's RS series motors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100+ mph capable on 4S\u003c\/strong\u003e — one of the fastest 5 inch prop designs available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExclusive hub locking design\u003c\/strong\u003e — reduces prop loosening during aggressive flight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-grade polycarbonate\u003c\/strong\u003e — stiff, durable, and consistent across the throttle range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 CW + 10 CCW included\u003c\/strong\u003e — 5 complete sets in one pack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe prop of choice for speed-focused FPV racing pilots. If you're running RS2306 or similar high-KV 22xx\/23xx motors and want every mph the motor can give, the AVAN-S is the prop to run.\u003c\/p\u003e","brand":"EMAX","offers":[{"title":"Red","offer_id":67704266981676,"sku":"AVAN-S-Red","price":1.99,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":67704267014444,"sku":"AVAN-S-Blue","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":67704267047212,"sku":"AVAN-S-Green","price":1.99,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":67704267079980,"sku":"AVAN-S-Yellow","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":67704267112748,"sku":"AVAN-S-Orange","price":1.99,"currency_code":"USD","in_stock":false},{"title":"Purple","offer_id":67704267145516,"sku":"AVAN-S-Purple","price":1.99,"currency_code":"USD","in_stock":false},{"title":"Clear","offer_id":67704267178284,"sku":"AVAN-S-Clear","price":1.99,"currency_code":"USD","in_stock":true},{"title":"Black Frost","offer_id":67704267211052,"sku":"AVAN-S-Black Frost","price":1.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/7863\/0444\/files\/Echo_Six_Hobbies_AVAN_S_Propeller_10CW_10CCW_Choose_Color_46427061289260.png?v=1793285822","url":"https:\/\/www.echosixhobbies.com\/products\/avan-s-propeller-10cw-10ccw-choose-color","provider":"Echo Six Hobbies","version":"1.0","type":"link"}