{"product_id":"dn-creality-sparkx-i7-color-combo-3d-printer","title":"Creality SPARKX i7 Color Combo 3D Printer","description":"\u003cdiv\u003e\n\n  \u003c!-- 1. Header --\u003e\n  \u003cdiv\u003e\n    \u003ch2\u003eMulti-Color AI Desktop 3D Printer\u003c\/h2\u003e\n    \u003ch2\u003eCreality SPARKX i7 Color Combo\u003c\/h2\u003e\n    \u003cp\u003eFrom unboxing to printing in five minutes. The SPARKX i7 Color Combo bundles Creality's fastest desktop FFF printer with the CFS Lite multicolor system — print up to four colors with 50% less waste, monitor everything from a built-in AI camera, and turn photos into 3D models with one tap.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- 2. Hero image --\u003e\n  \u003cdiv\u003e\n    \n  \u003c\/div\u003e\n\n  \u003c!-- 3. Key Features --\u003e\n  \u003cdiv\u003e\n    \u003ch3\u003eKey Features\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e260×260×255 mm build volume, up to 500 mm\/s print speed\u003c\/li\u003e\n      \u003cli\u003eCFS Lite multi-color system — print 4 colors with 50% less waste\u003c\/li\u003e\n      \u003cli\u003e720p AI camera with spaghetti, air-print, and build-plate detection\u003c\/li\u003e\n      \u003cli\u003eCubeMe AI — turn photos into 3D models in seconds\u003c\/li\u003e\n      \u003cli\u003eQuick-swap hotend (no tools), auto-leveling, ready to print in 5 min\u003c\/li\u003e\n      \u003cli\u003e2.85\" touchscreen, dynamic RGB lighting, dual-sided golden PEI plate\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- 4. Major section 1 --\u003e\n  \u003ch2\u003eMulticolor Printing, Made Simple\u003c\/h2\u003e\n  \u003cp\u003eThe CFS Lite multi-filament system turns the SPARKX i7 into a four-color desktop printer with intelligent purge management — 50% less waste, faster transitions, and clean color separation. Drop in Creality's RFID filaments and it identifies them automatically.\u003c\/p\u003e\n\n  \u003cdiv\u003e\n    \n  \u003c\/div\u003e\n\n  \u003ch2\u003eCFS Lite — 4-Filament Color System\u003c\/h2\u003e\n  \u003cp\u003eFour filament slots feed the printer through a smart purge tower, delivering sharp color transitions and clean multi-material prints — no manual swaps mid-job.\u003c\/p\u003e\n\n  \u003ch2\u003e50% Less Waste, Smarter Purging\u003c\/h2\u003e\n  \u003cp\u003eIntelligent purge management cuts waste by up to half compared to traditional multi-color setups — less filament burned per color change, less time per print.\u003c\/p\u003e\n\n  \u003ch2\u003eAuto Filament Identification (RFID)\u003c\/h2\u003e\n  \u003cp\u003eLoad Creality's RFID filaments and CFS Lite identifies the material, color, and remaining length automatically. No manual setup, no settings to fiddle with.\u003c\/p\u003e\n\n  \u003ch2\u003eAuto Refill + Run-Out Detection\u003c\/h2\u003e\n  \u003cp\u003eFilament run-out detection plus auto-refill keeps long prints alive. When a spool empties mid-job, CFS Lite swaps in the next available slot without pausing.\u003c\/p\u003e\n\n  \u003ch2\u003ePLA, PETG, TPU, And PLA-CF\u003c\/h2\u003e\n  \u003cp\u003eThe direct-drive extruder handles standard PLA and PLA-Silk plus PETG, TPU (Shore 64D+), and PLA-CF — flexible filaments included.\u003c\/p\u003e\n\n  \u003c!-- 5. Media break --\u003e\n  \u003cdiv\u003e\n    \n  \u003c\/div\u003e\n\n  \u003c!-- 6. Major section 2 --\u003e\n  \u003ch2\u003eAI-Driven, Effortless Printing\u003c\/h2\u003e\n  \u003cp\u003eCubeMe turns a portrait into a printable 3D model in seconds. The built-in AI camera watches every print for spaghetti, air-printing, and build plate problems. Pressure advance and input shaping deliver pro-grade output — all without diving into settings.\u003c\/p\u003e\n\n  \u003cdiv\u003e\n    \n  \u003c\/div\u003e\n\n  \u003ch2\u003eCubeMe AI Photo-To-3D\u003c\/h2\u003e\n  \u003cp\u003eSnap a portrait, tap CubeMe, and the AI generates a print-ready 3D model in seconds. Custom figurines and personalized gifts without learning modeling software.\u003c\/p\u003e\n\n  \u003ch2\u003e720p AI Camera Monitoring\u003c\/h2\u003e\n  \u003cp\u003eA built-in 720p camera with lighting watches every print in real time. View progress remotely and review what happened when a print didn't go to plan.\u003c\/p\u003e\n\n  \u003ch2\u003eSpaghetti + Air Print + Plate Detection\u003c\/h2\u003e\n  \u003cp\u003eAI-driven detection catches the classic failure modes — spaghetti printing, air printing, filament tangles, and build-plate issues — and alerts you before they ruin a long job.\u003c\/p\u003e\n\n  \u003ch2\u003eAuto-Leveling, Input Shaping, Pressure Advance\u003c\/h2\u003e\n  \u003cp\u003eBed leveling, nozzle Z-offset, and input shaping all run automatically before each print. Pressure Advance reduces oozing and corner blobs for sharper edges.\u003c\/p\u003e\n\n  \u003ch2\u003eCreality Cloud — Millions Of Models\u003c\/h2\u003e\n  \u003cp\u003eBrowse Creality Cloud's library of ready-to-print 3D models and send a print job with one tap. Endless inspiration with zero slicer setup.\u003c\/p\u003e\n\n  \u003c!-- 7. Media break --\u003e\n  \u003cdiv\u003e\n    \n  \u003c\/div\u003e\n\n  \u003c!-- 8. Major section 3 --\u003e\n  \u003ch2\u003eBuilt To Print Fast, Print Quiet\u003c\/h2\u003e\n  \u003cp\u003e500 mm\/s print speed, 10,000 mm\/s² acceleration, a 300°C hotend, and a direct-drive extruder. The SPARKX i7 is built for serious throughput — and a dedicated Night Mode lets it run overnight at a whisper.\u003c\/p\u003e\n\n  \u003cdiv\u003e\n    \n  \u003c\/div\u003e\n\n  \u003ch2\u003e500 mm\/s Speed + 10,000 mm\/s² Acceleration\u003c\/h2\u003e\n  \u003cp\u003eTop-tier speed and acceleration for the desktop FFF class. Finish a benchy in minutes, knock through prototyping cycles in an evening.\u003c\/p\u003e\n\n  \u003ch2\u003eDirect Drive Extruder, 300°C Hotend\u003c\/h2\u003e\n  \u003cp\u003eA direct-drive extruder handles flexible filaments reliably; the 300°C hotend and 100°C heated bed cover engineering-grade materials and large-area adhesion.\u003c\/p\u003e\n\n  \u003ch2\u003e260×260×255 mm Build Volume\u003c\/h2\u003e\n  \u003cp\u003eFrom an airless basketball to intricate miniatures, the build volume covers most desktop projects with detail to spare on either end of the size spectrum.\u003c\/p\u003e\n\n  \u003c!-- Mid-section 3 image break --\u003e\n  \u003cdiv\u003e\n    \n  \u003c\/div\u003e\n\n  \u003ch2\u003eQuick-Swap Hotend (5 Sec, No Tools)\u003c\/h2\u003e\n  \u003cp\u003eChange the nozzle in five seconds with no tools — switch between 0.2, 0.4, 0.6, and 0.8 mm for detail prints, draft prints, and everything between.\u003c\/p\u003e\n\n  \u003ch2\u003eNight Mode — Whisper-Quiet Printing\u003c\/h2\u003e\n  \u003cp\u003eActivate Night Mode for overnight printing — ultra-quiet operation, all lights off. Wake up to a finished print without losing a wink of sleep.\u003c\/p\u003e\n\n  \u003ch2\u003eDynamic RGB Status Lighting\u003c\/h2\u003e\n  \u003cp\u003eA built-in RGB light bar shows printing status in real time. Programmable patterns let you match the room aesthetic — or just glance to see if it's done.\u003c\/p\u003e\n\n  \u003c!-- 9. What's Included --\u003e\n  \u003cdiv\u003e\n    \u003ch3\u003eWhat's Included In The Color Combo\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eSPARKX i7 3D Printer (assembled, ready in 5 min)\u003c\/li\u003e\n      \u003cli\u003eCFS Lite multi-filament system (4 slots, RFID-aware)\u003c\/li\u003e\n      \u003cli\u003eDual-sided textured golden PEI build plate\u003c\/li\u003e\n      \u003cli\u003e0.4 mm quick-swap hotend (compatible with 0.2 \/ 0.6 \/ 0.8 mm)\u003c\/li\u003e\n      \u003cli\u003eUSB drive + power cable + tool kit\u003c\/li\u003e\n      \u003cli\u003e2-year free warranty (Color Combo exclusive)\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eCreality\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e1002140002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003ch3\u003eWhat's Included In The Color Combo\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eSPARKX i7 3D Printer (assembled, ready in 5 min)\u003c\/li\u003e\n      \u003cli\u003eCFS Lite multi-filament system (4 slots, RFID-aware)\u003c\/li\u003e\n      \u003cli\u003eDual-sided textured golden PEI build plate\u003c\/li\u003e\n      \u003cli\u003e0.4 mm quick-swap hotend (compatible with 0.2 \/ 0.6 \/ 0.8 mm)\u003c\/li\u003e\n      \u003cli\u003eUSB drive + power cable + tool kit\u003c\/li\u003e\n      \u003cli\u003e2-year free warranty (Color Combo exclusive)\u003c\/li\u003e\n    \u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/div\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":67621817057580,"sku":"DN-1002140002","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/7863\/0444\/files\/Echo_Six_Hobbies_1_1002140002_Creality-SPARKXi7ColorCombo-2.png?v=1792178153","url":"https:\/\/www.echosixhobbies.com\/products\/dn-creality-sparkx-i7-color-combo-3d-printer","provider":"Echo Six Hobbies","version":"1.0","type":"link"}