{"product_id":"fpvcycle-toothfairy-2-frame","title":"FPVCycle - ToothFairy 2 Frame","description":"\u003cp\u003e\u003cstrong\u003eThis frame is cut from really nice carbon.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eLow weight, excellent balance, easy to use, easy to service, respectable component protection, and DJI Vista ready. These were the goals of the Tooth Fairy 2. The low weight of this design will satisfy those 250g builds but it's really designed to handle ~325g AUW 5\" to 5.21\" build. Of course you can always run past that weight like we do so it's really up to you. We regularly carry GoPro's on our builds.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe most unique feature of this frame is that the Vista is integrated into the structure. The entire rear standoff is the Vista. Also, the 3\" is designed with the option to use \u003ca href=\"https:\/\/fpvcycle.com\/products\/geprc-2-prop-guard-ring-4-pack\" data-mce-href=\"https:\/\/fpvcycle.com\/products\/geprc-2-prop-guard-ring-4-pack\" target=\"_blank\"\u003ethese prop guards\u003c\/a\u003e if desired.\u003c\/p\u003e\n\u003cp\u003eLight frames suffer from vibrational noise and resonance.  These complications get worse as you increase the power of the quad.  In order to improve reliability of these matters, t\u003cspan\u003ehis design has a unique vibration management arm mounting mechanism pointed out by Chris Rosser (YouTube: Chris Rosser).  The mechanism introduces friction without the loss of rigidity.  As a result, the 4mm arm version of this frame will be able to handle more powerful motors than it should.  However because the frame does have somewhat long skinny arms, the 5mm version is STRONGLY recommended to use for any build that has motors larger than 2303 or otherwise 23mm short motors.  The 5mm version should be selected for use with our 23mm tall motors.\u003cbr\u003e\u003cbr\u003eFurthermore, there is an optional included carbon shim for ease of use with damping grease.  This shim\u003c\/span\u003e is intended to be used with Nyogel 767a, Nyogel pg-44A or some other vibration damping grease (or tape if you wish). The point is to put the grease between the shim and the main deck so you can swap arms easily without dealing with gooey grease all over the arms. The included arm screws should fit with the shim and grease but they could be 1mm longer. You may want to acquire 12mm M2 screws if you wish. Future batches will include slightly longer screws.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/oHONikUxCcw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/fpvcycle.com\/products\/toothfairy-2-antenna-and-gopro-mount-options\" target=\"_blank\"\u003e\u003cstrong\u003eGopro and antenna mounts CLICK HERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan\u003e Specifications of each version:\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch4\u003e\u003cspan\u003e5\" ToothFairy 2:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFits up to 5.25\" props\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e~52g built (56g with electronic mounting hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCentral 20x20 and Whoop mount pattern (~25.5x25.5)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor mounting: 12x12 M2 with two screw holes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRear 20x20 mount pattern for Vista or other items\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon spacers included for 20x20 VTX board or otherwise\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e15mm build height\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll steel hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated Vista into frame design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTop mounted battery\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e20mm cam mounting width\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e4mm arms\u003c\/strong\u003e, 2mm body, 1.5mm top and cam plates\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan\u003e5\" ToothFairy 2 with 5mm arms:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4 arms included with kit\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFits up to 5.25\" props\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e~61g built (65g with electronic mounting hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCentral 20x20 and Whoop mount pattern (~25.5x25.5)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor mounting: 12x12 M2 with four screw holes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRear 20x20 mount pattern for Vista or other items\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon spacers included for 20x20 VTX board or otherwise\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e15mm build height\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll steel hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated Vista into frame design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTop mounted battery\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e20mm cam mounting width\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5mm arms, 2mm body, 1.5mm top and cam plates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTo use carbon shim, you will need four M2x12mm screws.  Sorry for the oversight.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan\u003eToothFairy 2 - 3\" Cinewhoop:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4 arms included with kit\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUse the following \u003ca href=\"https:\/\/fpvcycle.com\/products\/cinesplore-v3-duct-set-of-4?_pos=1\u0026amp;_sid=27906aa30\u0026amp;_ss=r\"\u003educt \u003c\/a\u003e or print your own\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e~109g built (113g with electronic mounting hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCentral 20x20 and Whoop mount pattern (~25.5x25.5)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor mounting: 12x12 M2 with four screw holes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRear 20x20 mount pattern for Vista or other items\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon spacers included for 20x20 VTX board or otherwise\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e15mm build height\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll steel hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated Vista into frame design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTop mounted battery\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e20mm cam mounting width\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4mm arms, 2mm body, 1.5mm top and cam plates\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan\u003e3\" ToothFairy 2:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e4 arms included with kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional prop guards and 2\" props\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e~42g built (46g with electronic mounting hardware)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCentral 20x20 and Whoop mount pattern (~25.5x25.5)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMotor mounting: 9x9 M2 and 12x12 M2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRear 20x20 mount pattern for Vista or other items\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNylon spacers included for 20x20 VTX board or otherwise\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e15mm build height\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll steel hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated Vista into frame design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTop mounted battery\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e20mm cam mounting width\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4mm arms, 1.5mm body, 1.5mm top and cam plates\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cspan\u003e3.5\" ToothFairy 2 arms + Guard option:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e3.5\" arms for the Tooth Fairy 2 - set of 4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLight guards are an option for an open prop Cinewhoop alternative.\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"https:\/\/fpvcycle.com\/products\/fpvcycle-2203-motor-choose-kv?_pos=1\u0026amp;_sid=881cebe50\u0026amp;_ss=r\"\u003e23mm short\u003c\/a\u003e motor or comparable is recommended for 3.5\" props.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIn time, we will have a 3.5\" kit as well but not until June or July\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHQ 8 blade 89mm prop + guards is as silent as I've ever heard a Cinewhoop \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 16.38px;\" mce-data-marked=\"1\"\u003eRecommended Parts for 5\":\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2004 - 2306 motor size\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGemfan F3 prop\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e~90-130g battery\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAIO Whoop board\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2004 motors if available- must be kept as light as possible\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 16.38px;\"\u003eRecommended Parts for 3\":\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1404 minimum, 160X motor size recommended\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eModerately aggressive prop\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAIO Whoop board\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e~60-100g battery\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eAbout vibration management options for any build:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDamping grease between frame joints and under motors has been shown to make a significant improvement in quad resonance management. The difference can be as significant as going from completely un-flyable mess to beautifully flyable. More commonly it's just a minor improvement and only if you're at least somewhat versed in tuning filters. To those that don't burden themselves with tuning, there may not be any benefit other than consistency of performance across several builds. Other damping options such as electrical tape, TPU or some other solid material are only sometimes helpful and only on some quad builds (YMMV). Damping grease will improve ALL quads resonance profile without exception. The difference is that grease is a liquid and tape or some other material is a solid. Solids have elasticity while liquids do not. In fact if electrical tape helps, it's the sticky liquid glue attached to the solid electrical tape that is doing the work. The solid component of the tape is making it worse because it has elasticity. Regardless, if you're looking for performance improvements, vibration management and reducing filters are the easiest way to go. At this point it is recommended to use some sort of damping grease on every build because of how significant the benefits can be. That being said, we will also be the first to point out that vibration management is not at all required the vast majority of the time because of the software management in all flight code today.\u003c\/span\u003e\u003c\/p\u003e","brand":"FPVCycle","offers":[{"title":"5\" ToothFairy 2 with 4mm Arms","offer_id":53418637721900,"sku":"FIVE ALPHA","price":30.99,"currency_code":"USD","in_stock":true},{"title":"5\" Spare Arms 4mm (4 Pack)","offer_id":53418637754668,"sku":"4mm Spare Arms for TF2","price":11.99,"currency_code":"USD","in_stock":true},{"title":"5\" ToothFairy 2 with 5mm arms","offer_id":53418637787436,"sku":"SIX DELTA","price":34.99,"currency_code":"USD","in_stock":false},{"title":"5\" Spare Arms 5mm (4 Pack)","offer_id":53418637820204,"sku":"5mm Spare Arms for TF2","price":15.99,"currency_code":"USD","in_stock":true},{"title":"3.5\" ToothFairy 2","offer_id":53418637852972,"sku":"sku-44327419707713","price":32.99,"currency_code":"USD","in_stock":true},{"title":"3.5\" Arms (4 Pack)","offer_id":53418637885740,"sku":"THREE FIVE CHARLIE ARMS","price":6.99,"currency_code":"USD","in_stock":false},{"title":"Carbon Prop Guards for 3.5\" Arms (Set of 4)","offer_id":53418637918508,"sku":"sku-40822257451119","price":15.99,"currency_code":"USD","in_stock":true},{"title":"3\" ToothFairy 2","offer_id":53418637951276,"sku":"THREE CHARLIE FRAME","price":42.92,"currency_code":"USD","in_stock":false},{"title":"3\" Spare Arms (4 Pack)","offer_id":53418637984044,"sku":"THREE CHARLIE ARMS","price":10.99,"currency_code":"USD","in_stock":true},{"title":"3\" ToothFairy 2 - Cinewhoop (with ducts)","offer_id":53418638016812,"sku":"ONE GAMMA + 4X DUCTS","price":54.99,"currency_code":"USD","in_stock":false},{"title":"3\" ToothFairy 2 - Cinewhoop (NO DUCTS)","offer_id":53418638049580,"sku":"ONE GAMMA","price":33.99,"currency_code":"USD","in_stock":true},{"title":"3\" Cinewhoop Arms (4 Pack)","offer_id":53418638082348,"sku":"FIFTY OMEGA","price":16.5,"currency_code":"USD","in_stock":false},{"title":"Cinewhoop Ducts Only (4 Pack)","offer_id":53418638115116,"sku":"sku-39872949583983","price":29.99,"currency_code":"USD","in_stock":false},{"title":"Spare M2 Pressnuts (4mm press OD) for ToothFairy 2","offer_id":53418638147884,"sku":"sku-39823973285999","price":0.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/7863\/0444\/files\/20210618_183514-2_Custom_-BobKabab.jpg?v=1783512562","url":"https:\/\/www.echosixhobbies.com\/products\/fpvcycle-toothfairy-2-frame","provider":"Echo Six Hobbies","version":"1.0","type":"link"}