3W 5.8GHz video transmitter, suitable for long-distance FPV pilots
The TBS UNIFY PRO32 DP equipped with MMCX connectors is a high-quality video transmitter (VTX) designed specifically for FPV drones. It has higher robustness, smaller size, and lower power consumption. Enhanced performance and durability are achieved through advanced heat dissipation technology.features
Optimize heat dissipation
Double noise filtering (>63dB SNR)
Frequency range: 4990 MHz -6030 MHz
Using TBS Smart Audio 2.1 for OSD configuration
(via Betaflight, TBS Crossfire/Tracer, or Ardupilot)
One click frequency and power settings
Provide LUA support for CRSF users
MMCX connector
2-6S input
Optional circularly polarized antennaspecifications
Output power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 33dBm+(2000mW+)
Working voltage: 6V-25V (2-6S)
Video input impedance: 75 ohms
Size: 37 x 28 x 10 millimeters
Antenna connector: MMCX
Video format: NTSC/PAL
Signal to noise ratio:>63 dBm
Weight: 8.7gcontain
1x TBS UNIFY PRO32 DP 5G8 HV video transmitter
1x silicone wire (pre tinned end)
1x MMCX to SMA tail fiber
1x heat transfer tape for easy installation of FPV drones
Important reminder!
Unify Pro32 DP is a high-power video transmitter. Using low-quality antennas or operating them at higher power levels without antennas will inevitably cause the equipment to brick faster than you expect. Therefore, it is important to use the broadband function of the broadband antenna only at the highest power settingTBS UNIFY PRO32 DP (MMCX)
3W wide band 5.8GHz video transmitter for long range FPV pilots
The TBS UNIFY PRO32 DP (MMCX), is a high-quality video transmitter (VTx) designed for use in fpv drones. It comes with several features like improved robustness, decreased size and power consumption. Enhanced performance and durability through advanced heat dissipation which requires no additional heatsink or fan.
Highlights
World’s lightest 3 Watt video transmitter
Frequency range: 4990 MHz - 6030 MHz
OSD configuration using TBS Smart Audio 2.1
(via Betaflight, TBS Crossfire / Tracer or Ardupilot)
One button frequency and power setup
LUA support for CRSF users
MMCX connector
2-6S input
Double noise filtering (>63dB SNR)
Optimized heat dissipation, no heatsink required
Optional matching circular polarized antenna available
Specifications
Operating Voltage 6V - 25V (2 - 6S)
Video Input Impedance 75 Ohm
SNR >63dBm
Weight 8.7g
Dimensions 37 x 28 x10mm
Antenna Connector MMCX
Video Format NTSC/PAL
Output Power 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 33dBm+ (2000mW+)
Included
1x TBS UNIFY PRO32 DP 5G8 HV Video transmitter
1x Silicone cable (ends pre-tinned)
1x MMCX to SMA pigtail
1x Heat transfer tape for easy FPV drone mounting
IMPORTANT!
The Unify Pro32 DP is a high power video transmitter. Operating it with bad quality antennas, or without antennas on higher power levels will inevitably brick the unit - faster than you would expect. It is therefore important to use the wideband function only with wideband antennas on the highest power settings!
